Slackiller's Mapping

justin510 · Mapper Joined: 22 May 2005 Posts: 269 Location: New Jersy

i need a ladder texture Smile

_________________
<center> I Make Maps! </center>
<li> Add Cs Ip here </li>

xerox · Member Joined: 24 May 2005 Posts: 116 Location: Denmark

There is some ladder texture in the halflife.wad file in your game Very Happy

there is these ladder texture:

{ladder1
{ladder1B
{ladder2
{ladder2B
{ladder3A
{ladder1B

Did that help? Very Happy

_________________
Mapping rock's!

justin510 · Mapper Joined: 22 May 2005 Posts: 269 Location: New Jersy

it might, if i could find the Halflife.wad LOL
_________________
<center> I Make Maps! </center>
<li> Add Cs Ip here </li>

xerox · Member Joined: 24 May 2005 Posts: 116 Location: Denmark

Might this will help you... Very Happy

To half-life:

Half-life/valve/halflife.wad

To Counter-Strike:

Counter-Strike/valve/halflife.wad

To Condition Zero:

Condition Zero/valve/halflife.wad

Or tell me what sort of counter-strike you have Smile

_________________
Mapping rock's!

justin510 · Mapper Joined: 22 May 2005 Posts: 269 Location: New Jersy

i have cs 1.6 rith now i don't feel like putting cscz on yet but when i go to my valve folder i go ( c:/program files/valve............ )
_________________
<center> I Make Maps! </center>
<li> Add Cs Ip here </li>

xerox · Member Joined: 24 May 2005 Posts: 116 Location: Denmark

Program files/valve/counter-strike/valve/.......

Were there stads (counter-strike) i custom...

Hope this gonna help Very Happy

_________________
Mapping rock's!

justin510 · Mapper Joined: 22 May 2005 Posts: 269 Location: New Jersy

i can't find it
_________________
<center> I Make Maps! </center>
<li> Add Cs Ip here </li>

Slackiller · Posted: Sun Jun 12, 2005 7:06 pm Post subject:

use nems gcfscape to extract the wad from the gcf file
http://nemesis.thewavelength.net/index.php?p=1

justin510 · Mapper Joined: 22 May 2005 Posts: 269 Location: New Jersy

were cani find the gcf file?
_________________
<center> I Make Maps! </center>
<li> Add Cs Ip here </li>

kow75 · Mapper Joined: 17 Jan 2005 Posts: 170 Location: FL

If your using hammer. to make your maps for cs then you should know where the fgd is. scents the first part of the setup in configurations is the cs FGD.
_________________
I Am, There For I Am Not!

justin510 · Mapper Joined: 22 May 2005 Posts: 269 Location: New Jersy

Slackiller · Posted: Sun Jun 12, 2005 11:07 pm Post subject:

gcf are the actual game files in your steam folder.

the fgd is the entity file you use in hammer

justin510 · Mapper Joined: 22 May 2005 Posts: 269 Location: New Jersy

so what one do i neeD?
_________________
<center> I Make Maps! </center>
<li> Add Cs Ip here </li>

Slackiller · Posted: Sun Jun 12, 2005 11:57 pm Post subject:

there are ladder textures in the halflife wad, the halflife.wad is in the gcf file, so you need gcf scape to extract the wad from gcf file.
_________________
Slackiller's Site
Edit-Life
CSM2
verc forums

kow75 · Mapper Joined: 17 Jan 2005 Posts: 170 Location: FL

sorry I had a brain fart and miss read what you where asking for, lol.
but, if you need the halflife.wad go here to dl. All put it up just for you and any one else that may need it later.

http://www.clanxa.net/mappers/wads/halflife.zip

and yes you need the gcf or you can just go dl the wad. Pluse to extract the gcf. you need gfcscape and networking for run-times and some other crap.
_________________
I Am, There For I Am Not!

davik · Mapping Member Joined: 05 Apr 2005 Posts: 36

justin510 · Mapper Joined: 22 May 2005 Posts: 269 Location: New Jersy

thx

_________________
<center> I Make Maps! </center>
<li> Add Cs Ip here </li>

justin510 · Mapper Joined: 22 May 2005 Posts: 269 Location: New Jersy

it sayd the file is corrupted or something i will keep tring it tho.......
_________________
<center> I Make Maps! </center>
<li> Add Cs Ip here </li>

xerox · Member Joined: 24 May 2005 Posts: 116 Location: Denmark

now you got it... Very Happy

_________________
Mapping rock's!

justin510 · Mapper Joined: 22 May 2005 Posts: 269 Location: New Jersy

it says this :S
_________________
<center> I Make Maps! </center>
<li> Add Cs Ip here </li>

kow75 · Mapper Joined: 17 Jan 2005 Posts: 170 Location: FL

I havent put it up yet, lol. sorry. Wait tell this week end when I got time to upload it. Its a 6 hour upload for me. Got to love dailup:(
_________________
I Am, There For I Am Not!

justin510 · Mapper Joined: 22 May 2005 Posts: 269 Location: New Jersy

ok if you want but you don't have to i can find it online maybe
_________________
<center> I Make Maps! </center>
<li> Add Cs Ip here </li>

kow75 · Mapper Joined: 17 Jan 2005 Posts: 170 Location: FL

ok it took all night but the file is there. So just ckick on the link i gave you up there^. and it should work. It better because it took me all night literly, to upload it into my server. from 9:00pm to 9:00am
_________________
I Am, There For I Am Not!

helske_joe · Mapper Joined: 09 Sep 2005 Posts: 125 Location: OHIO

make sure u dont have steam running and then open up ur fgc file in your steam folder then its like a cstrike folder u just type half and ull highlight it then drag it to ur desk top or where ever u want it then load it as a wad and good luck finding it on the web its fucking huge if u cant get it ill make a wad with a bunch of ladders on it
_________________
www.helsk.com
63.251.20.30:27015

my clan im looking for members 1.6

if u can map some decent stuff ill run it

2gas · Member Joined: 02 Aug 2005 Posts: 93

have u tried running a search for it lol. when i can't find sumthin i just go search for it, like put in .wad

My half-life.wad is located in c:/SIERRA/counter-strike/valve

Or for cz its in c:/Valve/Condition Zero/valve